科研成果

1.             Liu Yushuang, Zhang* Peigen, Ling Chen, Ding Jianxiang, Tian Wubian, Zhang Yamei, Sun* Zheng Ming. Spontaneous Sn whisker formation on Ti2SnC. Journal of Materials Science: Materials in Electronics 2017:1-8.

2.             Ding Jianxiang, Zhang Peigen, Tian Wubian, Shi Jinjie, Zhang Min, Zhang Yamei, Sun ZhengMing. The effects of Sn content on the microstructure and the formation mechanism of Ti2SnC powder by pressureless synthesis. Journal of Alloys and Compounds 2017,695:2850-2856.

3.             Zhang Y. M., Jia L. T., Mei H., Cui Q., Zhang P. G., Sun Z. M. Fabrication, microstructure and properties of bricks fired from lake sediment, cinder and sewage sludge. Construction and Building Materials 2016,121:154-160.

4.             Shen Lu-wei, Zhang Ya-mei, Zhang Pei-gen, Shi Jin-jie, Sun Zheng-ming. Effect of TiO2 pigment gradation on the properties of thermal insulation coatings. International Journal of Minerals, Metallurgy, and Materials 2016,23:1466-1474.

5.             Pan D., Wang* K., Ding J., Liu Y., Zhang* P. The effect of dispersing agent on the formation of aluminium nitride nanoparticles/whiskers. Mater Res Innovations 2016,20:206-210.

6.             Liu Yushuang, Zhang* Peigen, Zhang Yamei, Ding Jianxiang, Shi Jinjie, Sun* ZhengMing. Spontaneous growth of Sn whiskers and a new formation mechanism. Materials Letters 2016,178:111-114.

7.             Zhang Peigen, Zhang Yamei, Sun Zhengming. Spontaneous Growth of Metal Whiskers on Surfaces of Solids: A Review. Journal of Materials Science & Technology 2015,31:675-698.

8.             Zhang Peigen, Shen L. W., Ouyang Jian, Zhang Yamei, Wu Shenqing, Sun Zheng Ming. Room temperature mushrooming of gallium wires and its growth mechanism. Journal of Alloys and Compounds 2015,619:488-497.

9.             Zhang Peigen, Liu Y., Ding J., Zhang Y. M., Yan J. L., An B., Iijima T., Sun Z. M. Controllable growth of Ga wires from Cr2GaC–Ga and its mechanism. Physica B: Condensed Matter 2015,475:90-98.

10.          Zhang* PeiGen, Liang JianDong, Yin LiYing, Guo ShengMin. The synthesis of micro-sized silicon carbide whiskers and the application for heat transfer enhancement. Science China Technological Sciences 2014,57:2371-2378.

11.          Wang Li, Zhang Peigen, Habibi M. H., Eldridge Jeffrey I., Guo Shengmin. Infrared radiative properties of plasma-sprayed strontium zirconate. Materials Letters 2014,137:5-8.

12.          Furushima Ryoichi, Katou Kiyotaka, Nakao Setsuo, Sun Zheng Ming, Shimojima Koji, Hosokawa Hiroyuki, Matsumoto Akihiro. Effect of Oxygen Content in WC-FeAl Powders on Microstructure and Mechanical Properties of Sintered Composites Fabricated by Pulse Current Sintering Technique. Materials Transactions 2014,55:1792-1799.

13.          Furushima R., Katou K., Nakao S., Sun Z. M., Shimojima K., Hosokawa H., Matsumoto A. Relationship between hardness and fracture toughness in WC-FeAl composites fabricated by pulse current sintering technique. International Journal of Refractory Metals & Hard Materials 2014,42:42-46.

14.          Sun Z. M., Sonoda T., Hashimoto H., Matsumoto A. Synthesis of MAX phase (Cr,V)(2)AlC thin films. In: Advanced Materials Science and Technology. Edited by Zhu S, Ni B, Ju DY; 2013. pp. 1-6.

15.          Sun Zheng Ming, Barsoum Michel W., Zhang Yamei, Hashimoto Hitoshi. On Equilibrium Ga Intergranular Films in Cr2GaC. Materials Research Letters 2013,1:109-113.

16.          Zhang Peigen, Liang Jiandong, Wang Kaiyang, Guo Shengmin. The formation of fibrous SiC in SiC/Al2O3 composites from the silica–carbon–aluminum system. Int J Refract Met Hard Mater 2012,35:196-201.

17.          Tian W. B., Kita H., Hyuga H., Kondo N., Sekine K. Joining of B4C by Al-Si infiltrated TiC tape: Effect of Si content on joint microstructure and corrosion resistance. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 2012,539:238-242.

18.          Tian W. B., Kita H., Hyuga H., Kondo N. Joining of SiC by Al infiltrated TiC tape: Effect of joining parameters on the microstructure and mechanical properties. J Eur Ceram Soc 2012,32:149-156.

19.          Sekine K., Kumazawa T., Tian W. B., Hyuga H., Kita H. Low-temperature joining of boron carbide ceramics. J Ceram Soc Jpn 2012,120:207-210.

20.          Sekine K., Kumazawa T., Tian W. B., Hyuga H., Kita H. Influence of joining time and temperature on the flexural strength of joined boron carbide ceramics. J Ceram Soc Jpn 2012,120:393-399.

21.          Li Zhaodong, Zhao Guanglin, Zhang Peigen, Guo Shengmin, Tang Jingke. Thermoelectric Performance of Micro/Nano-Structured Bismuth-Antimony-Telluride Bulk from Low Cost Mechanical Alloying. Materials Sciences and Applications 2012,03:833-837.

22.          Zhang Peigen, Wang Kaiyang, Liang Jiandong, Guo Shengmin. Formation of hexagonal AlN nanotowers and layered nanorods by direct nitridation of aluminum. Physica E: Low-dimensional Systems and Nanostructures 2011,43:934-937.

23.          Zhang Peigen, Wang Kaiyang, Guo S. M. Ceramic composites derived from rice hulls and aluminum cans. World Journal of Engineering 2011.

24.          Tian W. B., Kita H., Hyuga H., Kondo N. Joining of SiC by tape-cast SiC-Al2O3-Y2O3 interlayer. Advanced Engineering Ceramics and Composites 2011,484:26-31.

25.          Tian W. B., Kita H., Hyuga H., Kondo N. Synthesis, microstructure and mechanical properties of reaction-infiltrated TiB2-SiC-Si composites. Journal of Alloys and Compounds 2011,509:1819-1823.

26.          Tian W. B., Kita H., Hyuga H., Kondo N. Joining of SiC with Si infiltrated tape-cast TiB2-C interlayer: Effect of interlayer composition and thickness on the microstructure and mechanical properties. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 2011,530:580-584.

27.          Sun Z. M. Progress in research and development on MAX phases: a family of layered ternary compounds. International Materials Reviews 2011,56:143-166.

28.          Li Luping, Zhang Peigen, Liu Ranran, Guo S. M. Preparation of fibrous Ni-coated-YSZ anodes for solid oxide fuel cells. Journal of Power Sources 2011,196:1242-1247.

29.          Li Luping, Zhang Peigen, Guo Shengmin. Electroless Coating of Nickel on Electrospun 8YSZ Nanofibers. Advances in Materials Science for Environmental and Nuclear Technology II: Ceramic Transactions 2011,2:69.

30.          Keawprak N., Lao-ubol S., Eamchotchawalit C., Sun Z. M. Thermoelectric properties of Bi2SexTe3-x prepared by Bridgman method. Journal of Alloys and Compounds 2011,509:9296-9301.

31.          Du Y. L., Sun Z. M., Hashimoto H., Barsoum M. W. Electron correlation effects in the MAX phase Cr2AlC from first-principles. Journal of Applied Physics 2011,109:063707(063701-063705).

32.          橋本等, 正明孫, 中谷泰宏, 青木伸哉. Ti/SiC/TiC混合粉末圧粉体の常圧焼結によるTi3SiC2の合成. 粉体および粉末冶金2010,57:660-664.

33.          Zou Yong, Sun ZhengMing, Hashimoto Hitoshi, Cheng Lin. Reaction mechanism in Ti-SiC-C powder mixture during pulse discharge sintering. Ceram Int 2010,36:1027-1031.

34.          Zhang Peigen, Wang Kaiyang, Guo Shengmin. Large-scale synthesis of AlN nanofibers by direct nitridation of aluminum. Ceram Int 2010,36:2209-2213.

35.          Ye Zhou, Li Zhaodong, Roberts J. A., Zhang Peigen, Wang Jinke, Zhao Guanglin. Electromagnetic wave absorption properties of carbon nanotubes-epoxy composites at microwave frequencies. Journal of Applied Physics 2010,108:054315.

36.          Wang K. Y., Zhang P., Zhang L. C., Guo S. M. Synthesis of AlN nanowhiskers. Journal of Materials Research 2010,25:1771-1777.

37.          Tian W. B., Sun Z. M., Hashimoto H., Du Y. L. Microstructural evolution and mechanical properties of Ti3SiC2-TiC composites. Journal of Alloys and Compounds 2010,502:49-53.

38.          Tian W. B., Kita H., Kondo N., Hyuga H., Nagaoka T. Effect of composition and joining parameters on microstructure and mechanical properties of silicon carbide joints. J Ceram Soc Jpn 2010,118:799-804.

39.          Tian W. B., Kita H., Hyuga H., Kondo N., Nagaoka T. Reaction joining of SiC ceramics using TiB2-based composites. J Eur Ceram Soc 2010,30:3203-3208.

40.          Sun Z. M., Hashimoto H., Tian W. B., Zou Y. Synthesis of the MAX Phases by Pulse Discharge Sintering. International Journal of Applied Ceramic Technology 2010,7:704-718.

41.          Pang Wei-Kong, Low It-Meng, Sun Zheng-Ming. In Situ High-Temperature Diffraction Study of the Thermal Dissociation of Ti3AlC2 in Vacuum. J Am Ceram Soc 2010,93:2871-2876.

42.          Pang W. K., Low I. M., O'Connor B. H., Studer A. J., Peterson V. K., Sun Z. M., Palmquist J. P. Comparison of thermal stability in MAX 211 and 312 phases. Journal of Physics: Conference Series 2010,251:012025-012021-012024.

43.          Li Luping, Zhang Peigen, Liang Jiandong, Guo S. M. Phase transformation and morphological evolution of electrospun zirconia nanofibers during thermal annealing. Ceram Int 2010,36:589-594.

44.          Kita H., Hyuga H., Tian W. B., Nagaoka T., Kondo N. Exergy consumption evaluation of a silicon nitride manufacturing process. Journal of Ceramic Processing Research 2010,11:721-727.

45.          橋本等, 孫正明. メカニカルアロイングとホットプレスによるTiC-Ti3SiC2 複合材料の作製. 日本金属学会誌2009,73:19-25.

46.          橋本等, 孫正明. AlN-Ti2AlN複合材料合成の試み. 粉体および粉末冶金2009,56:541-545.

47.          橋本等, 孫正明. メカニカルアロイングを利用したTiCマトリクス中へのTi3SiC2結晶粒の微細分散. セラミックス2009,44:852-854.

48.          Zou Yong, Sun Zheng Ming, Hashimoto Hitoshi, Cheng Lin. Synthesis reactions for Ti3AlC2 through pulse discharge sintering TiH2/Al/C powder mixture. Journal of Alloys and Compounds 2009,468:217-221.

49.          Yang S. L., Yang Q. GROWTH OF NANOCRYSTALLINE DIAMOND THIN FILMS ON TITANIUM SILICON CARBIDE USING DIFFERENT CHEMICAL VAPOUR DEPOSITION PROCESSES. Can Metall Q 2009,48:27-32.

50.          Tian W. B., Sun Z. M., Hashimoto H., Du Y. L. Compressive deformation behavior of ternary compound Cr2AlC. Journal of Materials Science 2009,44:102-107.

51.          Tian W. B., Sun Z. M., Hashimoto H., Du Y. L. Synthesis, microstructure and properties of (Cr1-xVx)(2)AlC solid solutions. Journal of Alloys and Compounds 2009,484:130-133.

52.          Tian W. B., Sun Z. M., Hashimoto H., Du Y. L. Synthesis, microstructure and mechanical properties of Ti3SiC2-TiC composites pulse discharge sintered from Ti/Si/TiC powder mixture. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 2009,526:16-21.

53.          Tian W. B., Sun Z. M., Du Y. L., Hashimoto H. Mechanical properties of pulse discharge sintered Cr2AlC at 25-1000 degrees C. Materials Letters 2009,63:670-672.

54.          Pang W. K., Low I. M., O'Connor B. H., Sun Z. M., Prince K. E. Oxidation characteristics of Ti3AlC2 over the temperature range 500-900oC. Materials Chemistry and Physics 2009,117:384-389.

55.          Hashimoto H., Sun Z. M., Du Y. L., Tian W. B. Fabrication of fine grain titanium silicon carbide by using fine titanium hydride powders. Journal of Alloys and Compounds 2009,484:483-488.

56.          Hashimoto H., Sun Z. M. Preparation of TiC-Ti3SiC2 Composites by Mechanical Alloying and Hot-Pressing. J Jpn Inst Met 2009,73:19-25.

57.          Hashimoto H., Sun Z. M. An approach to the Synthesis of AlN-Ti2AlN Composite. J. Jpn. Soc. Powder Powder Metall. 2009,56:541-545.

58.          Du Y. L., Sun Z. M., Hashimoto H., Tian W. B. Bonding properties and bulk modulus of M(4)AlC(3) (M = V, Nb, and Ta) studied by first-principles calculations. Physica Status Solidi B-Basic Solid State Physics 2009,246:1039-1043.

59.          Du Y. L., Sun Z. M., Hashimoto H., Tian W. B. First-Principles Study on Thermodynamic Properties of Ti2AlC and Ti2SC. Materials Transactions 2009,50:2173-2176.

60.          Du Y. L., Sun Z. M., Hashimoto H., Tian W. B. Electron correlation effects in Cr2AlC. Physical Review B 2009:under review.

61.          Du Y. L., Sun Z. M., Hashimoto H., Barsoum M. W. Theoretical investigations on the elastic and thermodynamic properties of Ti2AlC0.5N0.5 solid solution. Physics Letters A 2009,374:78-82.

62.          Du Y. L. Electronic Structure and Elastic Properties of Ti3AlC from First-Principles Calculations. Chinese Physics Letters 2009,26.

63.          Zou Yong, Sun Zheng Ming, Tada Shuji, Hashimoto Hitoshi. Effect of liquid reaction on the synthesis of Ti3SiC2 powder. Ceram Int 2008,34:119-123.

64.          Zou Yong, Sun Zheng Ming, Tada Shuji, Hashimoto Hitoshi. Synthesis reactions for Ti3SiC2 through pulse discharge sintering TiH2/Si/TiC powder mixture. Materials Research Bulletin 2008,43:968-975.

65.          Zou Yong, Sun Zheng Ming, Tada Shuji, Hashimoto Hitoshi. Effect of Al addition on low-temperature synthesis of Ti3SiC2 powder. Journal of Alloys and Compounds 2008,461:579-584.

66.          Zou Yong, Sun Zheng Ming, Hashimoto Hitoshi, Tada Shuji. Low temperature synthesis of single-phase Ti3AlC2 through reactive sintering Ti/Al/C powders. Materials Science and Engineering: A 2008,473:90-95.

67.          Zou Yong, Sun Zheng Ming, Hashimoto Hitoshi, Tada Shuji. Synthesis of high-purity polycrystalline Ti3AlC2 through pulse discharge sintering Ti/Al/TiC powders. Journal of Alloys and Compounds 2008,456:456-460.

68.          Zhang Peigen, Cheng Chuanwei, Jiao Peipei, Li Yingying, He Zhipeng, Zhang Haiqian. Well improved photoswitching characteristic of CdSe nanorods via CdS nanoparticle-decoration. Materials Letters 2008,62:1151-1154.

69.          Yang S. L., Yang Q., Yi W. W., Tang Y., Regier T., Blyth R., Sun Z. M. FORMATION OF NANOCRYSTALLINE DIAMOND THIN FILMS ON Ti3SiC2 BY HOT FILAMENT CHEMICAL VAPOR DEPOSITION. In: 32nd International Conference on Advanced Ceramics and Composites. Edited by Lin HT, Zhu D. Daytona Beach, FL; 2008. pp. 99-104.

70.          Tian W. B., Wang P. L., Kan Y. M., Zhang G. J. Oxidation behavior of Cr(2)AlC ceramics at 1,100 and 1,250 degrees C. Journal of Materials Science 2008,43:2785-2791.

71.          Tian W. B., Wang P. L., Kan Y. M., Zhang G. J. Cr2AlC powders prepared by molten salt method. Journal of Alloys and Compounds 2008,461:L5-L10.

72.          Tian W. B., Sun Z. M., Du Y. L., Hashimoto H. Synthesis reactions of Cr2AlC from Cr-Al4C3-C by pulse discharge sintering. Materials Letters 2008,62:3852-3855.

73.          Tian W. B., Kan Y. M., Zhang G. J., Wang P. L. Effect of carbon nanotubes on the properties of ZrB2-SiC ceramics. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 2008,487:568-573.

74.          Hashimoto Hitoshi, Sun Zheng Ming Preparation of TiC-Ti3SiC2 composites by mechanical alloying and hot-pressing Materials Transactions 2008,49:1572-1578.

75.          Du Y. L., Sun Z. M., Hashimoto H., Tian W. B. First-principles study of polymorphism in Ta4AlC3. Solid State Communications 2008,145:461-464.

76.          Du Y. L., Sun Z. M., Hashimoto H., Tian W. B. First-principles study on electronic structure and elastic properties of Ti2SC. Physics Letters A 2008,372:5220-5223.

77.          Du Y. L., Sun Z. M., Hashimoto H., Tian W. B. Elastic properties of Ta4AlC3 studied by first-principles calculations. Solid State Communications 2008,147:246-249.

78.          Du Y. L., Sun Z. M., Hashimoto H., Tian W. B. First-Principles Study of Carbon Vacancy in Ta4AlC3. Materials Transactions 2008,49:1934-1936.

79.          橋本等, 孫正明. 新規導電性マシナブルセラミックス-チタンシリコンカーバイド-. セラミックス2007,42:786-788.

80.          Zou Y., Sun Z. M., Tada S., Hashimoto H. Synthesis of high-purity Ti3SiC2 through pulse discharge sintering of TiH2/SiC/C powder mixture. Materials Transactions 2007,48:133-138.

81.          Zou Y., Sun Z. M., Tada S., Hashimoto H. Rapid synthesis of single-phase  Ti3AlC2 through pulse discharge sintering a TiH2/Al/TiC powder mixture. Scripta Mater 2007,56:725-728.

82.          Zou Yong, Sun Zheng Ming, Tada Shuji, Hashimoto Hitoshi. Synthesis of single-phase Ti3SiC2 with the assistance of liquid phase formation. Journal of Alloys and Compounds 2007,441:192-196.

83.          Zou Y., Sun Z. M., Hashimoto H., Tada S. Mechanical behavior of Ti3AlC2 prepared by pulse discharge sintering method. Materials Transactions 2007,48:2432-2435.

84.          Yang S. L., Yang Q. Q., Sun Z. M. Synthesis and characterization of nanocrystalline diamond thin film on Ti3SiC2 Nanotechnology 2007,18:065703.

85.          Yang Songlan, Sun Zheng Ming, Yang Qiaoqin, Hashimoto Hitoshi. Effect of Al addition on the synthesis of Ti3SiC2 bulk material by pulse discharge sintering process. J Eur Ceram Soc 2007,27:4807-4812.

86.          Tian W. B., Wang P. L., Zhang G. J., Kan Y. M., Li Y. X., Yan D. S. Effect of composition and processing on phase assembly and mechanical property of Cr2AlC ceramics. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 2007,454:132-138.

87.          Tian W. B., Wang P. L., Zhang G. J., Kan Y. M., Li Y. X. Fabrication and properties of Cr2AlC ceramics. Journal of Inorganic Materials 2007,22:189-192.

88.          Tian W. B., Wang P. L., Zhang G. J., Kan Y. M., Li Y. X. Mechanical properties of Cr(2)AlC ceramics. J Am Ceram Soc 2007,90:1663-1666.

89.          Tian W. B., Wang P. L., Zhang G. J., Kan Y. M., Li Y. X. Progress of the layered ternary ceramics: M(2)AX. Journal of Inorganic Materials 2007,22:783-790.

90.          Tian W. B., Wang P. L., Kan Y. M., Zhang G. J., Li Y. X., Yan D. S. Phase formation sequence of Cr2AlC ceramics starting from Cr-Al-C powders. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 2007,443:229-234.

91.          Tian W. B., Vanmeensel K., Wang P. L., Zhang G. J., Li Y. X., Vleugels J., Van der Biest O. Synthesis and characterization of Cr(2)A1C ceramics prepared by spark plasma sintering. Materials Letters 2007,61:4442-4445.

92.          Tada S., Murase K., Hashimoto H., Sun Z. M. Fabrication of functionally graded Ti3SiC2-TiC binary-phase material. Materials Transactions 2007,48:139-142.

93.          Sun Zheng Ming, Yang Songlan, Hashimoto Hitoshi. Effect of Al on the synthesis of Ti3SiC2 by reactively sintering Ti-SiC-C powder mixtures. Journal of Alloys and Compounds 2007,439:321-325.

94.          Sun Z. M., Hashimoto H., Barsoum M. W. On the effect of environment on spontaneous growth of lead whiskers from commercial brasses at room temperature. Acta Materialia 2007,55:3387-3396.

95.          Sun Z. M., Hashimoto H. In situ synthesis of TiC-Ti3SiC2 composites by reactive sintering. Proc. ICCE 15, July 15-21, 2007, Haikou, China 2007:916-917.

96.          Hashimoto Hitoshi , Sun Zheng Ming, Tada Shuji, Zou Yong. Strengthening of Titanium Silicon Carbide by Grain Orientation Control and Silicon Carbide Whisker Dispersion. Materials Transactions 2007,48:2427-2431.

97.          Hashimoto Hitoshi, Sun Zheng Ming, Tada Shuji. Morphological evolution during reaction sintering of Ti, SiC and C powder blend. Journal of Alloys and Compounds 2007,441:174-180.

98.          橋本等, 正明孫, 多田周二, 井上陽介, 水野光国. Ti/Si/TiC混合粉末スラリーのスピンコートと反応焼結によるチタンシリコンカーバイドTi3SiC2の接合. 粉体および粉末冶金2006,53:4.

99.          Zou Y., Sun Z. M., Tada S., Hashimoto H. Synthesis reactions for Ti3AlC2 through pulse discharge sintering Ti/Al4C3/TiC powder mixture. Scripta Mater 2006,55:767-770.

100.        Zou Y., Sun Z. M., Tada S., Hashimoto H. Liquid reaction during synthesis of Ti3SiC2 through pulse discharge sintering Ti/Si/TiC mixed powders. Materials Transactions 2006,47:2987-2990.

101.        Zou Y., Sun Z. M., Hashimoto H., Tada S. Synthesis of Ti3SiC2 through pulse discharge sintering powder mixture containing coarse Ti. Materials Transactions 2006,47:1910-1913.

102.        Yang S. L., Yang Q. Q., Sun Z. M. Nucleation and growth of diamond on titanium silicon carbide by microwave plasma-enhanced chemical vapor deposition. Journal of Crystal Growth 2006,294:452-458.

103.        Tian W. B., Wang P. L., Zhang G. J., Kan Y. M., Li Y. X., Yan D. S. Synthesis and thermal and electrical properties of bulk Cr2AlC. Scripta Mater 2006,54:841-846.

104.        Tada S., Aoki K., Sun Z. M., Hashimoto H. A concurrent process for the synthesis and fabrication into rods of the ternary compound Ti3SiC2 by means of a traveling-zone sintering method. Materials Transactions 2006,47:302-305.

105.        Sun Z. M., Zou Y., Tada S., Hashimoto H. Effect of Al addition on pressureless reactive sintering of Ti3SiC2. Scripta Mater 2006,55:1011-1014.

106.        Sun Z. M., Hashimoto H., Zou Y., Tada S. Synthesis of ternary compounds Cr2GaC and Ti2GaC. In: Proceedings of 2006 Autumn Meetings of Japan Institute of Metals. Edited by Umakoshi Y. Niyigata, Japan: Japan Institute of Metals; 2006. pp. 325.

107.        Sun Z. M., Hashimoto H., Zhang Z. F., Yang S. L., Tada S. Synthesis and characterization of a metallic ceramic material-Ti3SiC2. Materials Transactions 2006,47:170-174.

108.        Sun Z. M., Barsoum M. W. Alternate mechanism for the spontaneous formation of freestanding Ga nanoribbons on Cr2GaC surfaces. Journal of Materials Research 2006,21:1629-1631.

109.        Hashimoto H., Sun Z. M., Tada S., Inoue Y., Mizuno M. Bonding of titanium silicon carbide Ti3SiC2 by spin coating of Ti, Si and TiC powder blend slurry and reactive sintering. J. Jpn. Soc. Powder Powder Metall. 2006,53:402-405.

110.        Hashimoto H., Sun Z. M., Inoue Y., Tada S. Synthesis of Ti3SiC2 from powder blend of Ti, Si and TiC. Journal of Alloys and Compounds 2006,426:263-267.

111.        Zhang Z. F., Sun Z. M. Shear fracture behavior of Ti3SiC2 induced by compression at temperatures below 1000 degrees C. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 2005,408:64-71.

112.        Sun Z. M., Zhen T. J., Barsoum M. W. Creep rupture induced silica-based nanofibers formed on fracture surfaces of Ti3SiC2. Journal of Materials Research 2005,20:2895-2897.

113.        Sun Z. M., Murugaiah A., Zhen T., Zhou A., Barsoum M. W. Microstructure and mechanical properties of porous Ti3SiC2. Acta Materialia 2005,53:4359-4366.

114.        Sun Z. M., Hashimoto H., Keawprak N., Ma A. B., Li L. F., Barsoum M. W. Effect of rotary-die equal channel angular pressing on the thermoelectric properties of a (Bi,Sb)(2)Te-3 alloy. Journal of Materials Research 2005,20:895-903.

115.        Sun Z. M., Gupta S., Ye H. H., Barsoum M. W. Spontaneous growth of freestanding Ga nanoribbons from Cr2GaC surfaces. Journal of Materials Research 2005,20:2618-2621.

116.        Sun Z. M., Barsoum M. W. Spontaneous room temperature extrusion of Pb nano-whiskers from leaded brass surfaces. Journal of Materials Research 2005,20:1087-1089.

117.        Keawprak N., Sun Z. M., Hashimoto H., Barsoum M. W. Effect of sintering temperature on the thermoelectric properties of pulse discharge sintered (Bi0.24Sb0.76)(2)Te-3 alloy. Journal of Alloys and Compounds 2005,397:236-244.

118.        Zhang Z. F., Sun Z. M., Zhang H., Hashimoto H. Micron-scale deformation and damage mechanisms of Ti3SiC2 crystals induced by indentation. Adv Eng Mater 2004,6:980-983.

119.        Zhang Z. F., Sun Z. M., Hashimoto H. Low temperature synthesis of Ti3SiC2 from Ti/SiC/C powders. Materials Science and Technology 2004,20:1252-1256.

120.        Yang S. L., Sun Z. M., Hashimoto H. Synthesis of Ti3SiC2 powder from 1Ti/(1+x)Si/2TiC powder mixtures. Journal of Alloys and Compounds 2004,368:318-325.

121.        Yang S. L., Sun Z. M., Hashimoto H. Reaction in Ti3SiC2 powder synthesis from a Ti-Si-TiC powder mixture. Journal of Alloys and Compounds 2004,368:312-317.

122.        Sun Z. M., Yang S. L., Hashimoto H., Tada S., Abe T. Synthesis and consolidation of ternary compound Ti3SiC2 from green compact of mixed powders. Materials Transactions 2004,45:373-375.

123.        Sun Z. M., Yang S. L., Hashimoto H. Ti3SiC2 powder synthesis. Ceram Int 2004,30:1873-1877.

124.        Abe T., Takagi T., Sun Z. M., Uchimoto T., Makino J., Hashimoto H. Machinable ceramic substrate for CVD diamond coating. Diamond and Related Materials 2004,13:819-822.

125.        Zhang Z. F., Sun Z. M., Hashimoto H., Abe T. Fabrication and microstructure characterization of Ti3SiC2 synthesized from Ti/Si/2TiC powders using the pulse discharge sintering (PDS) technique. J Am Ceram Soc 2003,86:431-436.

126.        Zhang Z. F., Sun Z. M., Hashimoto H., Abe T. Effects of sintering temperature and Si content on the purity of Ti3SiC2 synthesized from Ti/Si/TiC powders. Journal of Alloys and Compounds 2003,352:283-289.

127.        Zhang Z. F., Sun Z. M., Hashimoto H. Deformation and fracture behavior of ternary compound Ti3SiC2 at 25-1300 degrees C. Materials Letters 2003,57:1295-1299.

128.        Yang S. L., Sun Z. M., Hashimoto H., Park Y. H., Abe T. Oxidation of Ti3SiC2 at 1000 degrees C in air. Oxidation of Metals 2003,59:155-165.

129.        Yang S. L., Sun Z. M., Hashimoto H., Abe T. Ti3SiC2 powder synthesis from Ti/Si/TiC powder mixtures. Journal of Alloys and Compounds 2003,358:168-172.

130.        Yang S. L., Sun Z. M., Hashimoto H., Abe T. Synthesis of single-phase Ti3SiC2 powder. J Eur Ceram Soc 2003,23:3147-3152.

131.        Yang S. L., Sun Z. M., Hashimoto H. Formation of Ti3SiC2 from Ti-Si-TiC powders by pulse discharge sintering (PDS) technique. Mater Res Innovations 2003,7:225-230.

132.        Zhang Z. F., Sun Z. M., Hashimoto H., Abe T. A new synthesis reaction of Ti3SiC2 from Ti/TiSi2/TiC powder mixtures through pulse discharge sintering (PDS) technique. Mater Res Innovations 2002,5:185-189.

133.        Zhang Z. F., Sun Z. M., Hashimoto H., Abe T. Application of pulse discharge sintering (PDS) technique to rapid synthesis of Ti3SiC2 from Ti/Si/C powders. J Eur Ceram Soc 2002,22:2957-2961.

134.        Zhang Z. F., Sun Z. M., Hashimoto H. Rapid synthesis of ternary carbide Ti3SiC2 through pulse-discharge sintering technique from Ti/Si/TiC powders. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science 2002,33:3321-3328.

135.        Zhang Z. F., Sun Z. M., Hashimoto H. Fabrication and mechanical properties of ternary compound Ti3SiC2: Application of pulse discharge sintering technique. Adv Eng Mater 2002,4:864-868.

136.        Yang S. L., Wang F. H., Sun Z. M., Zhu S. L. Influence of columnar microstructure of a sputtered NiAl coating on its oxidation behavior at 1000 degrees C. Intermetallics 2002,10:467-471.

137.        Sun Z. M., Zhang Z. F., Hashimoto H., Abe T. Ternary compound Ti3SiC2: Part II. Deformation and fracture behavior at different temperatures. Materials Transactions 2002,43:432-435.

138.        Sun Z. M., Zhang Z. F., Hashimoto H., Abe T. Ternary compound Ti3SiC2: Part I. Pulse discharge sintering synthesis. Materials Transactions 2002,43:428-431.

139.        Zhang Z. F., Sun Z. M., Hashimoto H., Abe T. A new synthesis reaction of Ti3SiC2 through pulse discharge sintering Ti/SiC/TiC powder. Scripta Mater 2001,45:1461-1467.